How to un-root, factory reset, reset flash counter, and return your Samsung Galaxy S3 (S III) to completely stock.

Galaxy S3 Stock

With T-Mobile’s new JUMP program there are going to be plenty of people who will need to revert their phone back to completely stock in order to upgrade their device.  Lucky enough this is pretty simple to do, and I will explain this in a few steps below which should only take about 10 minutes or so.  These instructions will allow you to completely reset the flash counter, install stock firmware, and basically reset the phone to the state it was when you first purchased it.  So without any further delay, let’s un-root the Samsung Galaxy S III…

Getting Started

Needed Files

You will need Odin to flash the stock firmware on the phone, a copy of your carriers firmware, and Triangle Away to reset the flash counter.

Odin 3.07

Download “Odin 3” Odin3_v3.09.zip – Downloaded 53516 times – 972 KB

T999(v) Stock Firmware (select by carrier)

All of the links below are from the SamMobile site, which actually just sends you to HotFile.  HotFile is slow for downloads, so I will add new links as I can, but you can probably just search Google for the filename and find more of them. (http://www.sammobile.com/firmwares/)

T-Mobile

UVDMD5 JB 4.1.2 (android file host mirror)

UVDLJC JB 4.1.1

UVDLJA JB 4.1.1

VideoTron

VVLDLL1 JB 4.1.1

Wind

VVLDLL1 JB 4.1.1

Mobilcity

VVLDLL1 JB 4.1.1

Triangle Away

Triangle Away

Triangle Away (flash count reset)

This can be downloaded directly from the play store but costs about 2 bucks.  I recommend getting from Play Store to support the developer, but if you can’t or don’t want to, you can find a download link on the XDA forums.

Starting the un-root process

Reset Flash Count (using Triangle Away)

Now that you have the files needed, go ahead and run the Triangle Away app to reset the flash counter on your phone.  You will need to grant super user permissions to do so.  Once the app loads, click on the “Reset Flash Counter” and you should now have your flash count set at 0.  DO NOT GO INTO YOUR CUSTOM RECOVERY OR YOU WILL SET FLASH COUNT AT 1.

Samsung Galaxy S3 Download Mode

Samsung Galaxy S3 Download Mode

Flash Stock Firmware

Unplug and turn your phone completely off (remove battery if necessary). Put your phone into the Download Mode by using this key combination:

Do this until your phone vibrates, then release the power button WHILE STILL HOLDING VOLUME DOWN AND HOME. You should now be into the Download Mode, and your flash counter should say NO.

Odin Pre Flash

Odin Pre Flash

Next plug the phone into your computer’s USB port. Open the Odin file you downloaded earlier, you should see a highlighted box on the upper left side of Odin – If you don’t, download and install Samsung Kies to obtain the correct drivers for your device.  Look at the screenshot of odin, the red arrow is pointing at what you should see.  If you do not see that, download and install Kies to get the correct drivers, then try again.

Click on the PDA button on the Odin interface, and select the tar.md5 file that was extracted from the Stock Firmware you downloaded earlier.

Click Start and Odin will flash the stock firmware onto your phone.  This can take some time, be patient and do not touch your phone until it reboots itself.  Once the phone reboots, it is complete.

You have now installed the Stock Firmware with a zero flash counter!

If your screen gets stuck at the flashing blue samsung logo you may need to pull the battery and wipe with instructions below.  It can take some time for the phone to boot once everything new is installed, but if you’re certain it’s taking longer than normal, go ahead and factory reset and wipe and that should fix the problem.

Factory Reset with Stock Recovery

Now that you have a zero flash counter, and stock firmware, you can reset the phone to factory defaults using the stock recovery that was installed with the stock firmware.  Turn your phone off again completely, and press and hold the following keys

Once you feel a vibration, let go of the power button WHILE STILL HOLDING the volume up, and home button.

Once you see the screen for stock recovery, select Wipe Data/Factory Reset, then select Yes.  Repeat the wipe for cache as well.

After you have wiped everything, reboot, and profit!  Your phone is now completely stock and unrooted!

#after odin flash it factory resets by itself #azzerare counter odin #can i factory reset my rooted galaxy s3 #can you revert rooted galaxy s3 #can't fully unroot galaxy s3 #cara hard reset samsung odin #carrier reset samsung #delete flash counter samsung galaxy s3 #delete wind carrier root #download older version of triangle away #factory default #flash counter #flash counter galaxy s3 #galaxy acce #galaxy s iii #galaxy s3 #galaxy s3 4,2 odin ile sayaç sıfırlama #galaxy s3 factory reset root #how do i restore my samsung galaxy s3 to factory settings if rooted #how to delete flash count on galaxy s3 #how to flash samsung galaxy s3 without odin #how to hard reset galaxy s3 korea rooted #how to reset flash count to 0 i n samsung s3 mobile #how to reset flash counter #how to reset flash drive on gs3 #how to reset galaxy s3 from carrier #how to reset phone to stock using odin #how to reset samsung odin count #how to restore rooted samsung galaxy s3 #how to return to complwtely stock #how to set rooted gslaxy s3 phone back to factory #how to un reboot galaxy s3 #how to un reset samsung phone #how to unroot without flashing #http://smyl.es/how-to-un-root-factory-reset-reset-flash-counter-and-return-your-samsung-galaxy-s3-s-iii-to-completely-stock/ #if i master reset my gs3 will i lose root #mobile flash vs reset #odin will not flash s3 #odin wipe data/factory reset #phones that have root counter #Remove #remove root #remove samsung root count #reset #revert #rooted galaxy s3 factory reset #s3 #s3 flash counter #s3 korea #s3 reboot #s3 triangle away #sammobile triangle away s3 #stock #stock firmware galaxy s3 #tmobile samsung galaxy s3 complete phone factory reset from root and custom firmware #triangle away #triangle away fehlermeldung superuser access needed #triangle away och reset counter  #triangle away s3 #triangle away s3 3 #triangle away without root #un-root #unroot #unroot d link #unroot galaxy s3 without computer #what do you do when your galaxy s3 is just flashing samsung after a master reset? #what is flash counter galaxy s3 #what to delete to unroot s3 #what to do on a rooted s3 #wind s3 reset flash #zero flash count

Myles

Orlando, FL

Did this post help you?

Give back and rate it for me!

Related Posts

  • Dino Fabrizio

    please I used the power+volume+home botton and did factory reset yet it’s still showing black screen with samsung galaxy s7 edge and refused to load